HomeLab Part 9: Gigabyte BRIX s – A new challenger (in 2017)
I have this post now more than two years in my drafts and it will be really outdated after publishing but still I had to release it! My homelab needed some extension in form...
Tagged: Homelab
HomeLab Part 8: Cooling and AirFlow
In my last post I had a problem with the onboard 10GBit NICs. My assumption is that they were overheated and therefor failed. I read some blog posts of other blogger and some of them...
HomeLab Part 7: SuperMicro X9SRH-7TF & 10Gbit onboard NIC Problem
After running the new homelab for several month now I encounter a really annoying problem with the onboard 10GBit NICs (TX540-A2). I had the problem that an application was not correctly syncing across the direct...
HomeLab Part 6: Install most recent driver for the LSI2308 controller
After I upgraded the onboard LSI controller to firmware P19 I recognized some strang behaviour. After a few days I saw that all of the disks connected to the LSI become inactive or better said APD...
HomeLab Part 5: Upgrade LSI2308 Firmware
After building my new ESXi hosts I have to upgrade the onboard LSI 2308 firmware to IT mode so I can use it for VSAN in the future when I will get my third host....
HomeLab Part 3: Design Process – High End Design
In Part 1 and Part 2 I covered low power designs and medium designs of my homelab design process. In this part I cover one high end design which was inspired by the builds from...
HomeLab Part 2: Design Process – Medium Designs
In Part 1 of the Homelab series I went through the low power designs. In Part 2 I will concentrate on the medium designs, which means that these designs will consume more power but also...
HomeLab Part 1: Design Process – Low Power Designs
This post or rather this series was in my queue now for about 5-6 months. Sometimes I didn’t have time and sometimes I didn’t have passion to finalize it. During this months I created my...